VVDI2 Program Skoda Octavia Simos7.1 ECU& 09G TCU OK

VVDI2 Full Version supports ECU flashing after module replacement.

Here we are going to show you how to program ECU and TCU from Skoda Octavia using VVDI2.

Modules:

ECU Simos7.1

TCU 09G

Steps:

1.ECU/ Engine:

Run VVDI2 software and go to Skoda menu.

Go to "01 Engine".

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 1

Read DTC.

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 2

Select "ECU Flasher".

Load file to flash ECU.

Switch ignition OFF then ON as required.

ECU flash done.

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 3

Switch ignition OFF then ON as required.

Select "Coding".

Set new coding from "5" to "75".

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 4

2.TCU/ Gearbox:

Go to "02 Gearbox".

Select "ECU Flasher"

Load file to flash TCU.

TCU flash done.

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 5

Read and clear DTCs.

Vvdi2 Program Skoda Octavia Simos7.1 Ecu& 09g Tcu Ok 6

XhorsevvdiShare