How VVDI Key Tool Plus Read MQB48 D70F35XX IMMO Data?
Xhorse MQB48 License for VVDIPROG+VVDI2/ VVDI Key Tool Plus is released. With license we could get immobilizer data by reading NEC35xx chip data from dashboard.
Here we will show you a step-by-step guide:
Instrument Chip:
D70F35XX
Dashboard PCB:
Path:
Immo programming>>VW>>Select by Type>>MQB instrument immo system>>Instrument-MQB48(VDO/JCI-NEC35xx lock)
1.Read Dashboard
*Network connection is required
Go to
Programmer reads file>>Read NEC35xx chip
Check diagrams on the left.
Here we read it by lifting pin.
Daub scaling powder on the pin to be lifted.
Slightly lift up pin using hot-air gun and knife.
Solder a wire to chip so it could communicate with tool.
Solder rest wires to chip by diagrams.
Connect PCB to Key Tool Plus Pad by a DB15 cable.
Read data.
2.Add Key
Go to "Generate dealer key-Load immo data".
Load chip data.
Select
VW>>Prepare normal dealer key>>Add key - You should have a working key
Insert new key into coil.
Done! That's how we read MQB48 immobilizer data using Xhorse Key Tool Plus.
Comments
Post a Comment