Key Tool Plus Audi S5 2010 AKL Programming via OBD Guide

This article is going to show you how to program Audi S5 2010 AKL via OBD using VVDI Key Tool Plus Pad.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 1

Process:

Select

Immo Programming>>Europe>>Audi>>Automatically diagnose models

5th immo system.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 2

Select

Read BCM2 Data>>OBD Identify BCM2 Type

Connect Key Tool Plus Pad to OBD port.

This model supports data reading via OBD.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 3

Select

Read by OBDII>>Read BCM2 Data (OBD II)

Key count 2.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 4

Disconnect BCM module for 2-3 seconds

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 5

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 6

Perform "Read BCM2 Data (OBD II)" function again.

Read and save BCM2 data.

Enter "Make Dealer Key".

Select car model and load BCM2 data.

Put a new key into coil and write data in.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 7

Enter "Learn Key".

Load BCM2 data again.

Insert new key into/ close to ignition, turn on headlamp, and hold down brake.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 8

Learn success.

Key Tool Plus Audi S5 2010 Akl Programming Via Obd Guide 9

That's how Key Tool Plus Tablet programs 2010 Audi S5 AKL via OBD.

http://blog.xhorsevvdi.com/key-tool-plus-audi-s5-2010-akl-programming-via-obd-guide/

XhorsevvdiShare