XhorsevvdiShare

  Xhorse VVDI Key Tool plus is on sale $2099 EU/UK/US ship OK, key tool plus support renew function: convert used NEC key to blank status. And this blog we will share one review from Ionut Gabriel Danica Key Mercedes remote v57 unlock nec and virginized. Use with NEC Adapter Choose IMMO Programming>>Bnez>>Select from system>>read write key>>nec adapter read and write keys in vvdi key tool plus NEC Key photo Remove the chip from key pcb VVDI Key Tool Plus and NEC Adapter connection diagram Renew OK www.xhorsevvdi.com

  Xhorse VVDI PROG  V5.1.4 Software is released, get from download link from xhorsevvdi.com 1. Free Download V5.1. 4 VVDI PROG Software  (Password:123456) https://mega.nz/file/5BkHQBjK#MXjonGDtiA7PS-NGt4bUMB3PUQIkl3VvYHG7Fg_vm0U Password:123456   2. V5.1. 4 VVDI P ROG  Update  Info (2022-0 4 -2 6 ) * This version DON't need update firmware * Modify some options in<2-MCU>-> * Fix some bugs in TC23X-16F, TC23X-24F, TC23X-32F options in <2-MCU>-> + Add NXP-S9KEAZ128, NXP-S9KEAZ64 options in  <2-MCU>-> + Add R5F64561, R5F64562, R5F64563, R5F6456F, R5F6456G, R5F6456H options in <2-MCU>-> + Add D79F7027_Flash_16KB_Write,  D79F7028_Flash_32KB_Write options in <2-MCU>-> + Add R7F123xxx_Data_8KB_Write, R7F123xxx_Flash_128KB_Write options in <2-MCU>-...

  Xhorse XSTO01EN TOY.T for Toyota XM38 Smart Key is released! And some customer before Xhorse XSTO00EN old XM smart key, do they need to change? what is the difference of XM38 smart and old XM smart key ? After opening the inner PCB, if there are two chips on the circuit board - a square chip and a ten-pin chip (left in the picture), this is the XHORSE first generation Toyota XM smart-machine product number is XM28, there is only one on the circuit board .Only the square chip on the Toyota PCB (right in the pic) is the second-generation Toyota smart, the XM38.   1. XM38 can generate Toyota smart remote with all options XM28 previous XM smart can not support 0410, 0010 (A9, AA) The new second-generation XM38 smart is compatible with all the generation options of the first-generation smart, and the first-generation smart XM smart can still be used for generation without replacement. 2. XM38 Toyota smart is with key shell in the package. But first without, need to purchase O...

  One customer asked what this CAS socket looks like. Here we’ll show you how to use it.   Xhorse CAS Socket  is also called CAS Plug, working with VVDI2 / BMW Tool  to make keys for 7 Series CAS1&2 CAS3&3+ EWS1&2 Mainly for CAS1 AKL programming.   How to Connect CAS Socket? 1)To CAS1/2 2)To CAS3/3+ 3)To EWS   Source: http://blog.xhorsevvdi.com/what-is-xhorse-cas-socket-plug-for-vvdi2-bmw-tool/

  The new Condor XC-Mini Plus II Key Cutting Machine  has a function called “Manual Cutting”. It’s designed for modifying key blades before cutting. “Manual Cutting” Function includes two modes - Normal Mode & Line Mode Note: 1)Before starting this function, we need to click “Reset default”; after manual cutting, we need to click “modify” 2)During manual cutting, protective shield must be covered 3)Users can adjust working speed on parameter setting Normal Mode  enables us to thin or narrow  a key blade. Move the cutter by X/Y/Z button. Thin the blade. Line Mode  enables us to modify or shape  a key blade. This mode features Point recording and Automatic cutting.   For more details, please check: How to Duplicate New Honda Civic Integra Key by CONDOR XC-MINI PLUSⅡ ?

  VVDI 35160 Chip supports ST chips including 35080XX, 35160XXX. D80 D160 35080 35160 are supported while 35128 is not included.   Here is how to use Xhorse 35160 chip with VVDI PROG on the latest v5.1.4 software.   Without Adapter.   With Adapter.   Procedure: Note: If red dot is already on dash, it will remain after procedure ends 1)Read Original Chip Select the chip type, click “All”, Read and Save original 8-pin chip data In old version, “All” data was divided into 3 partitions. 2)Replace VVDI Chip Select chip type same as the original, and write the data file to VVDI chip (VVDI 35160 chip will automatically generate chip) If we need to correct odometer, click "Erase INC", then the first 2 lines will be erased (all “00”). Manually enter odometer, then click "Write", operation completed. 3)Verify Dash Solder the edited chip back to dash, and check if the dash works.   https://www.xhorsevvdi.com/

  One customer asked how to sort a problem with a moving chip in Xhorse Wire Keys . Sometimes he can’t start a Mazda 6 2008 because of this problem.   Here we shares some locksmith fellows’ choices:   Review 1 Super glue or masking tape.   Review 2 Paper glue is perfect for the job.   Review 3 Used to use the locktite brand blue putty, but I found that the gorilla glue version works better. super cheap. works great, holds chip where u want, and u can still take the chip out if u want. Review 4 Blue Tack. Source: http://blog.xhorsevvdi.com/how-to-solve-moving-chip-in-xhorse-wired-keys/

  Xhorse Dolphin XP-005 EU UK US warehouse on sale $1675, and this blog we will share one review about Xhorse Dolphin XP005 , cut VW cross polo 2012 model car key OK.   And dolphin xp005 newest firmware version is V1.6.0, please use xhorse update kit software to update firmware www.xhorsevvdi.com

  Issue: Got IMMO data from Kessy module by VVDI Key Tool Plus , load the file into VVDI2  to get 7 bytes CS, and it prompts “CRC verify error”.   Solution: Reduce Kessy immo data file size from 2.25KB to 2.00KB.   How to reduce Kessy immo data file size? As the instruction, data from 0*800 is secured and every time Key Tool Plus  will get a different result. So we save data from 0*800 and delete data below 800 (801*900). Then read 7 bytes CS code without problem, and we can make a dealer key. Also, we need to save an original key to avoid corrupting data.   Via: http://blog.xhorsevvdi.com/vvdi-key-tool-plus-kessy-immo-data-read-problem-solution/

  Question: Dolphin XP007 , why on the left of the key are both lights green and on the left it touching one key?   Here Xhorsevvdi  technician Answer: During Calibration, Only Left light on, Probe higher than Cutter; Move the micro-adjuster knob to move down the probe. Only Right light on, Cutter higher than Probe; Move the micro-adjuster knob to move up the probe. Both lights on, probe and cutter at the same height, calibration finished   So in picture 1, the calibration is done correctly. In picture 2, we need to move up the probe: Loosen position 3 (position 4), and then tighten position 4 (position 3). Xhorse Dolphin XP007 User Manual Via: http://blog.xhorsevvdi.com/solved-dolphin-xp007-both-lights-over-left-key-green-and-on/